WATER INSULATION MORTAR ( MONO COMPONENT)

DESCRIPTION:
Cement base mono component water insulation mortar.

SPECIFICATIONS:
Practical and quick application and do not crack on surface.

APPLICATION AREAS:
It is used to prevent the water insulation layer for base flats, based walls ,water tanks and wett area .

SURFACE PREPARATION:
Surface should be cleaned from porosity and surface cracks. Purified from paint, dust etch materials which will decrease the adherence. Rough surfaces should be repaired by Fixkim repair mortar. Surface should be moistured before application.

PREPARED MORTAR AND APPLICATION :

25 kg. FIXKIM LAST LAYER PASTE and 6, 5 lt. water are put in a container. By using hand mixer is mixed necessary amount. Rest it 4 to 5 min. after than mix again to obtain homogenous mixture. The mortar spread with brush. Second layer is spreaded perpendicular to after than dry first layer .Applied thickness should not be more than 4 mm for each layer. Surface which will be walked , should be covered by alum or ceramic.For the last layer 4 days should be waited.

NOTIFICATION:
Can not be added anything (Lime, Cement , Gypsum,plaster etch. ) to FIXKIM MONO COMPONENTLY WATER ISOLATION MORTAR. Expired FIXKIM MONO COMPONENTLY WATER ISOLATION MORTAR can not be used.

STORAGE:
Under the dry & humidity free circumference in the original cover Can be stocked 8 months with a stacking not exceed 10 tiers. Should be consumed in 7 days after cover is open CONSUMPTION
For 1 mm thickness 2 kg. /m²

TECHNICAL SPECIFICATION