FIXKIM ANCHORAGE MORTAR

DESCRIPTION: Cement base , used forfixing the machines to the floor ,self spreading anchorage mortar.

PROPERTIES: Easy applicable, can be used 6-10 cm .

APPLICATION AREAS: Used for the montage of the machines, base floor & for repairment of the worn out concrete

SURFACE PREPARATION: Surface should be tough & clean . Prufied from paint,dust etch materials which will decrease the adherance . Rough surfaces should be repaired by Fixkim repair mortar.Surface should be moistured before application.

MORTAR PREPARATION & APPLICATION: 25 kg. FIXKIM ANCHORAGE MORTAR and 3-4 lt. water are put in a container. By using hand mixer is mixed slowly necessary amount. Rest it 5 min. after than mix again to obtain homogeous mixture & used. , 24 hours later application surface should be moistured for 7 days periodically.

NOTIFICATION: Can not be added anything (Lime,Cement ,Gysum etch ) to FIXKIM ANCHORAGE MORTAR. Expired FIXKIM ANCHORAGE MORTAR can not be used. Since it is a cement base material, direct contact of hands should be avoided .Gloves should be worn.

STORAGE:Under the dry & humidity free circumference in the originall cover Can be stocked 8 months with a stacking not exceed 10 tiers. Should be consumed in 7 days after cover is open.

TECHNICAL SPECIFICATION

Density : 1450 ± 100 kg/m³
Wet unit weight : 1900 ± 150 kg / m³
Average Compression strength: 60 N / mm²
Average Bending strength :>102 N / mm²
Application Temp : +5Cº / +30 Cº

CONSUMPTION
For 1 cm tickness 17 kg / m²