FLEX FUGA GROUTING MATERIAL

DESCRIPTION:
Cement based , polymer additive, resin containing, can be applicable space between 0-10 mm fuga grouthing plaster.

APPLICATION AREAS:
Can be applied on interior and exterior places dry and wett circumfrances vertically & horizantally for ceramic, granite, porcelaine, marble and tile a grouthing materials.

SPECIFICATION:
High resistant water proof and fozen, suitable for using at high temperature deviation places. It has high performance because of elasticity.

SURFACE PREPARATION:

Space between ceramic and tiles should be purified from paint ,dust, cement concrete disposal etch by using brush. If it is neccessary fuga applied areas should be moistured  before application.

APPLICATION:
25 kg of FLEX FUGA GROUTING MATERIAL is added 7,2 lt water in a cup mixed untill all nods are eliminated. Rest the mixture 5 min and mix it again. Prepared paste is applied to the surfaces
with rubber tipped trowel. Fuga is cleaned after 50 min. by using wett sponge. For high performance 1 day later application surface shoul be moistured for 7 days.

NOTIFICATION:
Can not be added anything (Lime,Cement ,Gysum etch ) to fuga. Expired fuga can not be used
After adhesing of ceramic and tile, wait 24 hours for application of fuga Can not be applied to the frozen and direct sunlight exposed surfaces. Since it is a cement base material, direct contact of hands should be avoided .Gloves should be worn.

STORAGE:
Under the dry & humidity free circumference in the originall cover Can be stocked 8 months with a stacking not exceed 10 tiers. Should be consumed in 7 days after cover is open.

TECHNICAL SPECIFICATION

CONSUMPTION